+31 40 7501650

CT 600S Non‑Contact Surface Profilometer (Large Parts)

The CT 600S is a gantry‑based system suited to the measurement of heavy and large components.  Ideal for measuring flatness, step height roughness and other parameters over large distances, the sensors are mounted on an automated z‑axis providing  resolutions to 3 nm and measurement ranges to 2 mm. The design allows for the calibration of the system flatness independent of the sample weight.

Contact us

The CT 600S is a non‑contact profilometer with a 600 mm x‑, y‑motion system. The gantry design with air bearings is moving the sensor‑camera assembly while the sample is fixed on the granite platform. This motion system allows to calibrate the system flatness independent of the sample weight. The CT 600S reaches a total accuracy of 0.3 microns over the entire travel of 600 mm.

The CT 600S is ideal for measuring flatness on large samples, as well as step height, roughness and other 2D and 3D analysis. Circular and ellipsoidal scans minimize the inspection time on round parts.

The sensors are mounted on an automated z‑axis and are available with a resolution down to 3 nm and a measurement range up to 12 mm.


Share on:
  • Fast, precise and accurate magnetic linear motors with air bearings
  • Measurement speed 4 kHz / 20 kHz
  • 600 mm travel in x‑ and y‑direction, lateral resolution 0.05 µm, motorized z‑axis
  • 2D profiles and 3D topographical maps (topography measurement)
  • Large scanning areas, up to the maximum travel of 600 mm at maximum x‑, y‑, z‑resolution
  • Chromatic white light sensors
  • Resolution down to 3 nm, measurement range up to 12 mm
  • High resolution off‑axis colour camera
Share on:

Share on:

CT 600S Datasheet

Share on:

    * A confirmation will be send to your e-mail to validate a successful form subscription,
    In case you did not receive confirmation e-mail please refill the form again or contact Accelonix directly.

    Share on: