Search

Huntron Tracker 2800 / 2800S

Tracker 2800 Features

  • Optional Software Control using Huntron Workstation
  • Enhanced Range Selections
  • Full Screen Signature Zoom
  • Color Touch Screen controls
  • Huntron SigAssist® built-in
  • Built-in DC Voltage Source for testing gated devices (i.e. SCRs, relays, etc.)
  • Up to 40 pin scanning with the Tracker 2800S

Quick Enquiry

If you want to know more about Huntron Tracker 2800 / 2800S

The 2800 series of Huntron Tracker are designed to complement conventional test instruments in the debug and troubleshooting process. Using the proven power-off test method known as Analog Signature Analysis it eliminates the risk of further circuit damage, which often occurs when power is applied. The Huntron Trackers are suited for todays varied signal circuit cards where Analog and Digital are mixed together.

The Tracker 2800’s features variable range parameters resulting in over 100 combinations of voltage, source resistance and frequency. The 2800 series is a great off-line support tool for the automated Huntron Access Prober diagnostic systems.
The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical signature deflection, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.

Specification Huntron Tracker 2800 Huntron Tracker 2800S
Number of Voltages plus values 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
Number of Resitances plus values 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ
Number of Frequencies plus values 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHzn 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz
Range Selection Manual or use Auto Scan; Optional Software control Manual or use Auto Scan; Optional Software control
Front Panel Connections Banana jacks for A/B Test channels and Common Banana jacks for A/B Test channels and Common; A and B 40 pin IDC connectors for cable based scanning (i.e. DIP clips)

Huntron Brochure