Search

EM Test DPA 500N

1-Phase Digital Power analyzer for harmonics & flicker testing

EMTest 1-Phase Digital Power analyzer for harmonics & flicker testing

  • Real-time data acquisition
  • Internal hard disk for data storage
  • 16-Bit A/D converter
  • Wide-range current input
  • Wide-range voltage input
  • Built-in lumped flicker impedance
  • High-sophisticated analyzing capability
  • USB interface for control and data transfer

Quick Enquiry

If you want to know more about EM Test DPA 500N
1-Phase Digital Power analyzer for harmonics & flicker testing

The fully compliant harmonics and flicker analyzer

The EM Test DPA 500N is a fully compliant analyzer for harmonics and flicker as per the latest IEC/EN 61000-3-2, IEC/EN 61000-3-3 and JIS C 61000-3-2 requirements. It follows the design specifications as per IEC/EN 61000-4-7: Ed.2.1 (2009) (for Class I instruments) and IEC/EN 61000-4-15 (2010).
Based on a real-time kernel and equipped with its own harddisk it allows to record the measuring data continuously without any gaps or overlapping. The rectangular measurement window is synchronized to each group of 10 or 12 cycles of the mains supply frequency (50Hz or 60Hz) by means of a digital PLL (Phase Lock Loop). A wide-range current input (up to 50A) avoids loss of measured data due to range switching that would occur when using different shunt resistors.
The classification of the measurement can be selected at any time, before or after the measurement has been performed. During all measurements the AC supply voltage is measured simultaneously with the current.
The built-in flicker impedance, which is automatically selected when doing flicker measurement, makes the
DPA 500N a complete single-box unit for both harmonics and flicker analysis.
By means of an external current clamp (optional) the current range can be extended up to 140Arms and more.

Models

DPA 500N
Single phase harmonics and flicker analyzer with integrated flicker impedance up to 16 A
Option 0 – 500 mA current measurement range

DPA 500N1.1
Single phase harmonics and flicker analyzer with integrated flicker impedance up to 26 A
Included 0 – 500 mA current measurement range

 

  • EN 301489-1
  • EN 301489-17
  • EN 301489-24
  • EN 301489-7
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-4-15
  • EN 61000-4-7
  • EN 61000-6-1
  • EN 61000-6-2
  • IEC 60601-1-2
  • IEC 61000-3-11
  • IEC 61000-3-12 Ed.2:2011
  • IEC 61000-3-2
  • IEC 61000-3-3
  • IEC 61000-4-15 Ed.2:2010
  • IEC 61000-4-7
  • IEC 61326
  • JIS C 61000-3-2

net.control – the control and analysing software for harmonics and flicker

net.control is the software tool needed for the operation of the harmonics and flicker analysing system. It offers all features to control the DPA 500N, to upload the recorded measuring data and for the classification and analysis. It includes analysis as per the latest standards as well as procedures following the former standard requirements. An easy Fail/Pass function allows fast analysis while detailed data is available for extended analysis and EUT evaluation purposes. net.control offers a powerful documentation capability with direct export to Word.

DPA 500N

DPA 500N1.1