+31 40 7501650

Teseq CBA 6G-030D

1 GHz to 6 GHz 30 Watt Single Band Power Amplifier

  • Class A Operation
  • Touch Screen Color display
  • Input Overdrive Protection
  • USB, Ethernet, GPIB and RS232
    interface
  • Built in Calibrated Directional Coupler

 

Contact us

Description

New class A, high power density, design has allowed us to produce a 30 watt, 1.0 GHz to 6 GHz amplifier in a compact 4U package. With a minimum of 30 watts of linear power this amplifier is ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range. Readily integrated with the Teseq ITS6006 80 MHz to 6 GHz test system these amplifiers can form part of a broadband test system. The new touch screen colour display gives an immediate visual indication of forward and reverse power along with the current operating status of the amplifier and access to diagnostic information such as gate current and heatsink temperature.Fan speed adjusts depending on the heatsink temperature thus ensuring the minimum audio noise level possible in the operating environment. The inbuilt calibrated forward power coupler provides a quick and easy way to monitor forward power with any power meter. Input overdrive protection prevents damage to the input devices due to accidental high input power. Multiple remote interfaces are available as standard including USB, GPIB, RS232, and Ethernet. Amplifier gain can be controlled either remotely through one of the available interfaces or via the front panel touch screen.

Key Parameters

Frequency 1.0 GHz to 6.0 GHz
Saturated Power 35 Watts (minimum)
Power at P1 dB 30 Watts (minimum)
Gain 45 dB
Gain Flatness +/-3 dB

Additional RF Data

Harmonics at 30 W -20 dBc (Typical) -18 dBc (Minimum)
Maximum Input without Damage +15 dBm
Spurious -70 dBc
Stability Unconditionally stable
Load VSWR without damage (All Phase Angles) Infinite
Load VSWR without fold back (All Phase Angles) 2:1
RF Input Type N (socket)
RF Output Type N (socket)
Gain Control 0 – 30 dB in 255 steps

Impedance/VSWR

Output Impedance 50 Ω
Input VSWR 2:1
Output VSWR 2:1

Interfaces and Electrical

Interface Touch screen, GPIB, RS232, Ethernet & USB
Safety Interlock BNC Connector, Open for Standby
Supply Voltage 85 –264 Vac
Supply Frequency 47–63 Hz
Supply Power Requirement < 0.35 KVA (typical full power)

Physical and Environmental

Dimensions 4U, 19 Inch Rack width, 615 mm deep
Weight 15 kg
Temperature Operational 0 °C–40 °C
Temperature Non Operating -40 °C–85°C
Humidity (Non Condensing) 95%

Options: To be specified at time of ordering

Rear Panel RF Connectors CBA 6G-030D-10
Front Panel RF Connectors CBA 6G-030D
  • IEC/EN 61000-4-3
  • IEC/EN 61000-4-20
  • IEC/EN 61000-4-21
  • MIL STD 461
  • RTCA/DO 160
  • ISO 11452-2
  • ISO 11452-3
  • ISO 11452-11
  • SAE J1113-24
  • SAE J1113-27

Teseq CBA 6G-030D Datasheet

* A confirmation will be send to your e-mail to validate a successful form subscription,
In case you did not receive confirmation e-mail please refill the form again or contact Accelonix directly.