+31 40 7501650

DS Series

The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste, conductive adhesive, potting compounds, and more.

DS Series systems are compatible with all GPD Global dispense pumps.

Contact us

The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste, conductive adhesive, potting compounds, and more. DS Series systems are compatible with all GPD Global dispense pumps.

For the utmost in versatility and capability the DS Series is able to handle up to 3 different dispense pumps. The system is able to toggle between each of the pumps in a single program.

The DS Series is highlighted by its large work area, up to 24″ x 24″ (609mm x 609mm), the largest standard platform in the industry. Available in standalone or inline it can be configured to meet your production needs.

Share on:

Standalone systems are configured with a flat worktable and board crowders that hold the product to a registered location. For additional support the worktable may have vacuum ports or support custom fixturing. Inline configurations are standard with 3 stations, Entrance, Work area and Exit. Each of the stations is configured with a board stop and product present sensors to track the product through the system. Heat is configurable to the DS Series in the worktable for standalone systems or all three zones of a conveyor in the inline configuration.

Pumps may also have heat applied for fluid that perform better under an elevated temperature environment. Construction of the DS Series system is based on a welded steel frame that has been carefully manufactured for high accuracy manufacturing. During assembly the system is subjected to a number of alignments and setups to ensure the highest level of precision. After manufacturing the systems will undergo the contour mapping process for the final touches on positioning capability. All DS Series models are well suited for multi-functional applications combining dispensing with light assembly / pick & place applications.

  • Inline and Stand-alone Models
  • Up to 3 Pump/Tool Mount Stations
  • Automatic Vision Alignment System (GPD Cyclops system) and Pattern Recognition Trainer
  • Easy Programming of dots, lines, fills, arcs, etc. through GPD Global FLOware Operating Software
  • Real-Time Editor while system is in production
  • Interlocked Safety Barriers for Operator Safety
  • Auto Calibration Station for automatic X,Y,Z needle calibration
Share on:
  • Positioning Accuracy ± 0.0015″ (± 0,0381 mm)
  • Repeatability ± 0.0006″ (± 0,0152 mm)
  • Dispense Rate 28,000 dots/hour
  • Linear Speed up to 20 inches/second (508 mm/second)
  • 2 Work Area Sizes: DS9000: 18″ x 18″ & DS9100: 24″ x 24″
  • X-Y-Z Brushless Servo Motors with Precision Ball Screws
  • Inline model is SMEMA compatible
Share on:

Application

Pumps / Accessories

High viscosity pastes, glues, adhesives. Precision Auger Pump
High speed, low viscosity. Jetting Pump (NCM5000)

No drip, volumetric repeatability.

Volumetric Pump (PCD)

Simple liquid dispense applications, low-to-mid viscosity..

Time Pressure

Real time process control.

Fluid Pressure Control (FPC) for use with Precision Auger Pump and Jetting Pump (NCM5000) pumps, as well as Time Pressure Dispensing

Share on:

Share on:

DS Series Datasheet

Share on:

* A confirmation will be send to your e-mail to validate a successful form subscription,
In case you did not receive confirmation e-mail please refill the form again or contact Accelonix directly.

Share on: